July 27, 2022

The reasons for product cracking during injection molding are as follows: Processing aspect (1) If the processing pressure is t

July 26, 2022

1. The hydraulic oil in the fuel tank is insufficient. The suction of t

July 25, 2022

Oil temperature is too high Oil temperature abnormal rise may be caused

July 23, 2022

1, template parallelism template parallelism zui can reflect the condit

July 22, 2022

1. Wire joints Checking the wires of the joints that are not fastened m

July 19, 2022

First, preventive maintenance work (a), hydraulic part 1. The lack of h

July 18, 2022

Injection molding machine is one of the commonly used equipments in the plastics processing industry. Usually it takes a long time to work. Therefore, how to ensure the normal operation of the injecti

July 16, 2022

Injection molding two-color or mixed-color plastic products are prepared by mixing the same raw materials into two different colors, and plasticizing two kinds of color melts by two i

July 09, 2022

Professor Liu Hesheng of Nanchang University undertook the second batch of cross-century academic technology leaders training program for key disciplines in Jiangxi Province—the gas-assisted injecti

July 08, 2022

The process of mold design is generally like this: from the user to the plastic product drawing (which may be two-dimensional or three-dimensional), the mold design engineer considers the appropriate

July 07, 2022

This software is an auxiliary software in the plastic tensile machine, which converts the test results of the plastic tensile machine into various data we want. The main features are as follows:

July 06, 2022

The project of "Pulsatile Pressure Induced Injection Molding Equipment for Plastic Products" jointly developed and produced by Guangzhou Bochuang Machinery Co., Ltd. and the National Engineering Resea

July 05, 2022

In the increasingly competitive injection molding industry, how to reduce production costs has become the primary issue of enterprise development. In the actual production cost, the energy con

July 04, 2022

The manufacture of micro-components has always been an application of injection molding technology, however, a "magic" thermoforming process produces high-quality micr

July 01, 2022

Insert molding refers to a molding method in which a resin is injected into a mold and a resin is injected into a mold, and the molten material is bonded to the insert to form an integrated prod

June 29, 2022

The quality of injection molded products involves product design,

June 28, 2022

Position control: Some injection molding machines have mold shift position, die position, stock storage and injection position control. The position of the mold is from the mold opening to the

June 27, 2022

Time setting: There are drying time, injection and holding time, coolin

June 25, 2022

Flow rate: related to the speed of the injection molding machine, such as screw speed, injection speed, mold and neutron speed. Screw speed: In addition to adjusting the pre-plastic flow rate,

June 24, 2022

Molding process pressure: Pre-plastic back pressure: injection pressure

June 22, 2022

Molding temperature: barrel temperature, plasticizing temperature, nozz

June 21, 2022

There are two kinds of quality of the products, namely: the quality of the inner material and the quality of the appearance. The quality of the inner material is mainly the mechanical strength, and th

June 16, 2022

This article will discuss the proces